Product Description

Two Component Silicone Potting Adhesive

SI8125A/B

 

∎Technical Data Table

PROPERTY	UNITS	PART A									PART B
----	----	8125T	8125M		8125W		8125W-1		8125B		8125T			8125
Color	Visual inspection	Colorless transparent fluid	Matte transparent white fluid		White fluid		White low viscosity fluid		Black fluid		Colorless fluid			Colorless fluid
Viscosity	25°C, cps	1000~1,300	1,800		3,500		2,100		1,400~2,000		20-50			20-50
Density	25°C, g/cm3	1.02	1.03		1.18		1.18		1.18		0.98			0.98
Corresponding curing agent (Part B)		8125T	8125T		8125		8125		8125		---			---
Mixture/mass ratio	----	A:B=100: (10±3)
Viscosity of mixture	25°C, cps	1,000		1,000		2,300		1,500		1,200		---	---
Operation time	25°C, min	40		40		40		50		40		---	---
		The operation time can be adjusted with the proportion of hardener part B.
Surface hardening time, min		70~180
Characteristics after curing
Cured appearance	----	Colorless transparent elastomer		Matte white elastomer		White elastomer		White elastomer		Black elastomer		---	---
Hardness	Shore A	21		21		28		15		12		---	---
Tensile strength	MPa	1.0		1.0		1.2		1.2		1.2		---	---
Shear strength	MPa	0.3		0.3		0.7		0.7		0.7		---	---
Loss factor	1 MHz	＜0.008
Dielectric strength	kV/mm, 25°C	≥20
Volume resistance	DC500V, Ω·CM	1.1×1015
Dielectric constant	1 MHz	＜3.00
Long-term apply temperature	°C	-50~150

 

 

∎Product Description

●SI8125A/B is used in potting protection of varied components. It can vulcanize to deep layer. The two components have a good fluidity after mixing. The operation time can be adjusted with the proportion of hardener part B. It can bond well with most materials without using any primer. It can be used to fix the accessories to resist water, dust and leakage of electricity.

.

∎Typical Applications

●Used for Automotive electronics, modules like Power control modules, Solar modules, Junction box, LED spotlight, Wall washer light, Strip lights, LED fluorescent lamp, etc.

 

∎Key Features

●Two-component high transparency liquid silicone rubber, condensation dealcoholization type

●Low viscosity, easy to process and operate

●Low hardening condensation, no corrosion and stressless

●Excellent electric insulativity and stability in high temperature 

●Excellent bonding ability, good water-proof and moisture-proof property

 

∎Packing Specification

• SI8125T,Transparent，code：0104020

Part A：10kg/drum  ； Part B： 1kg/pot

• SI8125M, Matte transparent white，code：0104050

Part A：10kg/drum  ； Part B： 1kg/pot

• SI8125B , black，code：0104000

Part A：10kg/drum  ； Part B： 1kg/pot

• SI8125W, white，code：0104010

Part A：10kg/drum  ； Part B： 1kg/pot

• SI8125W-1,White low viscosity，code：0104040

Part A：10kg/drum  ； Part B： 1kg/pot

• Customized packing

 

 

∎Transport &Storage

● When stored at or below 25°C in the original unopened containers, this product has a usable life of 12 months from the date of production.

It’s non-dangerous goods, can be transported as normal chemicals, CAUTION leakage during transport.

 

.∎Directions for Use

Mix Part A and Part B by 100:10 mass ratio, after evenly mixed, pouring directly into the components or modules as per requirements. It’s recommended to slowly pour along the walls of the implements, so as to reduce the bubbles happens.

Still the potted component to let out the bubbles. Vacuum defoaming process of the mixture before potting can improve the performance.

 

∎Attention of operation

●Keep away from Children

●Avoid contact with eyes and skin. If contact with your skin, scrub first with soap water or alcohol, then rinse with water. If contact with your eyes, rinse with plenty of water, and seek medical treatment immediately.

● It is forbidden to build on the surface of the wet substrate.

 

 

 ● Typical Applications

Applications	LED modules \Lamps	PV modules/Junction box	Automobile / Power modules
Operation time，min	50	25	45
Curing time，hour	5	L2.5	5

 

∎Safety Operation Data

MSDS isn't included here. Please read TDS, MSDS and label carefully before operation. You can get MSDS from MAXTECH or other distributors, or mail to service center maxtech@shmaxtech.com

∎Warranty and Liability

All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advice we supply don't apply in any circumstances. MAXTECH don't make assurance of any other applications outside the specification until MAXTECH supply a special written guarantee. MAXTECH is only responsible to replace or refund if this product is defective within the warranty period stated above. MAXTECH makes it clear that will not be liable of any accidents.

 

 

 

Payment Terms︰ TT

Product Image